Anhang Materials and Tests

Material Codes comparison DIN - International Standards

Germany USA UK France Japan European
DIN Short name AISI/ASTM B.S. AFNOR JIS EN
1.0308.91 St 35 N          
1.0038.61 R St 37-2 N          
1.4021.95 X20Cr13         10 250-5, 01.95
10 088-1
1.4016.99 X8Cr17          
1.4301.99 X5CrNi18 9 304 304S11 Z4CN19-10F SUS304 10 222-5: 1995
10 250-5, 01.95
1.4541.99 X10CrNiTi18 9 321 312S31 Z6CNT18-10 SUS321  
1.4571.99 X10CrNiMoTi18 10 316Ti 320S18 Z6CNDT17-1 SUS316Ti  
1.4462.99 X2CrNiMoN22 5          
1.4539.99 X1CrNiMoCu25 20 5 UNS N 08904 Z2NCDU25-20  
1.4404.99 X2CrNiMo17 13 2 316L 316S11 Z2CND17-12 SUS316L 10 222-5: 1995
1.0356.05 TT St 35 V          
1.0460.91 C 22.8 N         10 273
(1.0481)   105        
1.0305.91 St 35.8 N          
1.1181.95 Ck 35 V 1035 080A35 2C35 S35C 10 250-2, 10.94
1.7335.91 13CrMo4 4 N A182-F11 620-440 15CD3.5 SFVA F 12 10 028 T 2, 04.93
1.7709.95 21CrMoV5 7 V          
1.4922.95 X20CrMoV12 1          
3.7025.10 Ti I          
2.0402.26 CuZn40Pb2F43          
2.4617.40 NiMo28F75          
2.4610.40 NiMo16Cr16TiF70          
2.4360.10 NiCu30FeF45          
2.4816.10 NiCr15FeF55          
2.4819.40 NiMo16Cr15WF70          
3.3206.71 AlMgSi 0,5 F22          
  Alloy G-30          

If you have any comments or corrections within this table, please send us an E-Mail.


SPECIAL TEST PROCEDURES

All Material- and Test certificate in accordance with EN 10204 (2.1, 2.2, 3.1, A/B/C).

bulletHydraulic pressure test, leakage (bubble test)
bulletDye-penetrant-test
bulletHardness test
bulletMagnetic field strength
bulletUltrasonic check
bulletX-ray
bulletLeakage with Helium
bullet

Other mechanical tests or material analysis by TÜV (e.g. heat elongation test, notch-bar impact test, PMI, etc. )

 

© 2003-2008 by PHÖNIX Messtechnik GmbH, Design by KHO                                                                                                           
letzte Aktualisierung: 08.02.08